Top 8 poe cable tester UK – Audio & Video Adapters

As an Amazon Associate I earn from qualifying purchases.

1. kwmobile

LAN, RJ11, RJ12 with 2 Scan Modes and Remote Unit, Ethernet Network RJ45, kwmobile Network Cable Tester w/PoE

kwmobile - Includes: lan cable tester which includes the pin-out indicator, 1x BNC male/male adapter, remote terminator and PoE tester, 2x BNC adapter cables, 3x RJ45 to RJ11 adapters and 2 user manuals in English.

Cable types: the test device is used with 10base-t, rj45, 10Base-2, 158a, RJ11 patch cables, tia 568A/568B, token ring cables. Technical data: the lan cable tester measures 81x57x24mm main unit, 81x26x24mm control unit and is powered by 9V-block battery not included. Test continuity: easily read the correct pin configurations of ethernet cable connections. Ensure the strength is sufficient for proper usage. Attention: do NOT use in active circuits! .
Height5.18 cm (2.04 Inches)
Length20.26 cm (7.98 Inches)
Width13.28 cm (5.23 Inches)
Part Number44494.03

2. Hollee

Network Cable Tester Hollee 4 in 1 PoE Tester Inline with NVC for CAT5e/CAT6/CAT6a 3 Scan Modes RJ45 Cable Tester with Lamp for PoE Voltage PSE Standards Measure Cable Fault Distance NF-8209

Hollee - Ce certification. 1080 days warranty, non-contact, we are available 24/7. Equipped with the most powerful cable location technologies, great for any work environment. Our lan tester and tracer can test shielded wire, short circuit/open circuit/cross of test network.

Available to 10m/100M/1000M Hub/switch. Standard rj45 interface to ensure tight connection. It has 3 modes for options to track cable, it can shield the interference of digital signals without noise which can help you find the line easier. Headphones using when noisy or long-distance line hunting is weak. Digital cable scanninghollee professional wire checker can provide digital and analog signaling all in one network toner and probe.

Large lcd screen of network cable tester rj45: 128*64 dot matrix, high-definition display. With lcd display, you can view the screen even in the dark. These 3 modes can be switched at will. Detection probe for accurate detection. At the same time, such as POE/ordinary switches in the engine room. The receiver can detect the AC voltage of household electrical wiring. Suitable for scanning in different scenarios, such as digital mode, analog mode and PoE mode.
Part NumberHollee-491013

3. Digitus

Digitus Network Tester & Cable Tester, PoE Testing Device, LAN network cable coax cable, RJ45 RJ11 ISDN BNC, Automatic Scan

Digitus - Brand : digiTUS. Manufacturer : DIGITUS. Digitus network tester & cable tester - poe testing device - automatic Scan - RJ45 RJ11 ISDN BNC - LAN network cable coax cable.
Height4 cm (1.57 Inches)
Length16 cm (6.3 Inches)
Width10 cm (3.94 Inches)
Part NumberDN-14001-1

4. Kauden

KAUDEN KA226N Structured Wiring Cable Tester with Separate Power-Over-Ethernet Checker

Kauden - 2 part kit with LAN tester and POE checker. Package weight: 02 kilograms. Test pin out status on RJ45 structured wiring systems. Determine presence of live Ethernet cabling.
Height11 cm (4.33 Inches)
Length81 cm (31.89 Inches)
Width3.4 cm (1.34 Inches)
Part NumberKA226N
WarrantyManufacturer warranty 1 year

5. FLUKE networks

Fluke Networks MS-POE MicroScanner POE Cable Verifier

FLUKE networks - Locate and trace cable or wire pair with IntelliTone digital and analogue toning with IntelliTone probe sold separately. Micro scanner POE, carrying case. Poe verification – detects the class 0-8 from 802. 3at,. 3af and. 3bt devices, and voltage of available POE from the connected switch. Switch detection– displays network switch speeds capabilities up to 10G. Displays cable length, wire map, cable ID and distance to fault.
BrandFLUKE networks
ManufacturerFluke Networks
Height3.6 cm (1.42 Inches)
Length16.3 cm (6.42 Inches)
Weight0.25 kg (0.54 Pounds)
Width7.6 cm (2.99 Inches)
Part Number5018508

6. MEO

MEO Line finer Wire Tracker Network Cable Tester For optical fiber cable BNC RJ45 RJ11 Line Finding Testing poe switch online tester

MEO - Support s-poE Switch online test. Support online test network cable. Support polarity of power source test. Support poE Switch online test. Support optical fiber cable testoption.


Blue CAT 6 Gigabit Ethernet Wire -650MHz 100W PoE++ RJ45 UTP Category 6 Network/Patch Cord Snagless w/Strain Relief Fluke Tested UL/TIA Certified N6PATC15MBL, 15m CAT6 Ethernet Cable - Poe support: 24 awg stranded copper conductors & ul rated wiring supports up to 100W for PoE devices like VOIP phone & security systems; IEEE 802. 3bt & dte power compliance reduces cable heating.

High performance cat6 ethernet cable: 100% copper for error-free multi gigabit 1/2. 5/5gbps connections; 10gbps up to 50m; fluke patch cord tested to comply w/ANSI/TIA-568-D Category 6 & ETL Verified. Specs: length: 50ft 15m | color: blue | 650 mhz rated | structure: 4 pair utp | rj45 | jacket: pvc | wire Gauge: 24 AWG Copper | Wiring: ANSI/T568B | ETL Verified | Warranty: Lifetime. Quality construction: etl & ul certified wire; 50-micron gold-plated connectors prevent rust/corrosion to avoid costly network downtime; High quality PVC jacket resists bending or fraying damage.

Easy installation: snagless patch cord for easy installation & flexible disconnection in wiring conduits; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.
Height0 cm (0 Inches)
Length1500.12 cm (590.6 Inches)
Weight0.59 kg (1.3 Pounds)
Width0 cm (0 Inches)
Part NumberN6PATC15MBL

8. CSL-Computer

Network cable tester for RJ45 RJ11 cable, CSL, Ethernet Line Tool Internet Broadband Connection Speed Capability Test, LAN network cable tester, Patch cable tester line tester

CSL-Computer - For this, you can select between two speeds. Use: this csl network cable tester you can check your network or ISDN cable. Ask, then the cable test carried out the selector switch to "S" in slow speed.

Power supply: 1x 9v battery not included | dimensions: 96 x 103 x 27 mm | weight: 125g | Color: Black | Delivery: CSL Network Cable Tester for RJ45 / RJ11 cable. Optimal as a tester for testing networking and communications cables. The "off" position the unit switches off. Model name: csl network cable Tester for RJ45 / RJ11 cable. Operation i: after connecting the cable to the main and to the remote device, you must turn on the device. Operation ii: set the selector switch to "on" to perform a cable test in moderate speed.
Part Numbergufgbfgbgv